Home > Hp Psc > Hp 2410 Troubleshoot

Hp 2410 Troubleshoot

Contents

I HAVE HAD MY PRINTER FIXED THREE TIMES AND IT STILL HAS THIS SAME PROBLEM OF IT GETTING STUCK. You would need to unplug the USB cable first before running the removal tool. First Time Here? It sounds like it is trying to set up, butthen just starts clicking and the power light keeps blinking. http://batteryuniveristy.com/hp-psc/hp-2410-help.php

This happens whether I print from a file or use the photocopier. (I hope that makes sense!) Does anyone have any ideas please? Maybe someone should contact a lawfirm about doing a class action suit against HP to get them to replace these printers with something that works. SCAN OPTIONS ARE not installed. If it is dirty, the scanner will not function properly. https://www.ifixit.com/Wiki/HP_PSC_2410_Troubleshooting

Hp 2410 Printer Troubleshooting

In order to clean the calibration strip, you must remove the scanner glass, so see our Cleaning the Scanner Glass Repair Guide to properly remove the scanner glass. must unplug it... Remove the electronics board and carriage rod to free it from the print mechanism.

Any suggestions? If this is your case, repost and I will send you the more involved uninstall instructions. 0Votes Share Flag Collapse - Sounds are the clue by mjd420nova · 9 years ago by Anonymous on Jul 15, 2007 at 12:53pm Add comment Please sign in to comment 0 The pushing the cancel button down trick WORKED!!! How To Reset Hp Psc 2410 Photosmart All-in-one Printer by Dancer on Mar 15, 2010 at 5:23pm Add comment Please sign in to comment 0 CAN U PLESASE ME OUT..........

it turns out that those pins are pushing 4 hidden buttons, so i just put something instead of broken pins to push these buttons.and..... Hp Psc 2410 Clicking Noise GOOD LUCK!!!THANKS,CARLOS by Anonymous on Sep 23, 2009 at 3:22pm Add comment Please sign in to comment 0 This is a simple cleaning issue. Product Number * Example: C8375A, B8F40EA, H1P31AA Privacy Policy © Copyright 2016 HP Development Company, L.P. http://h30434.www3.hp.com/t5/Inkjet-Printing/psc-2410-photosmart-all-in-one-PROBLEM/td-p/2176867 i really need help haha.

Symptoms:After my home had a power outage, my HP PSC 2410 kept going through a power cycle. Hp Psc 2410 Photosmart All-in-one Printer Driver Broken printer carriage¶ If your printer carriage is broken, it will need to be replaced. There is also a sensor located there that will sense when the carriage hits home, it could be dirty, dislodged, faulty or the cable unplugged or not plugged in the right If the printer is connected to a computer, then you have to check the computer screen for instructions.

  • It seems I'm not the only one at all!!!I am sticking with Brother as I have had no problems with my brother machine. - unknown 0 To move the scanner head,
  • Sure need it fixed promptly.
  • I tried everything suggested in this thread to stop the "head banging reset" including partial and full reset, disassembly and moving the scan head, removing the "fax card" and even cleaning
  • Can I reprogram the printer and replace the refilled black cartridge for hp origional cartridge?Thanks for any help - small non-profit director by M3C on May 11, 2009 at 8:29am Add
  • What I did to fix: Removed printer's back panel (removed duplex unit, removed 2 torx screws and gently pulled the panel, disconected speaker cable on front board).
  • I also repair my psc 2410 printer that stuck .Thank agian Moshe by unknown on May 24, 2009 at 2:26pm Add comment Please sign in to comment 0 OMG!
  • Open the printer as if you are going to change the cartridges, then release the latches on the left and right and the scanner will rotate upward and lift off.4.
  • If it is dirty the 'white' stripe will not be found and therefore the scan bar trys to move more to the right, while it is bumping against mechanical barriers.So this

Hp Psc 2410 Clicking Noise

Any suggestions? http://h10010.www1.hp.com/ewfrf/wc/product?product=303753&lc=en Many thanks again!!! - Anonymous 0 Iam lost PLEASE help!! Hp 2410 Printer Troubleshooting Wipe on the white strip area with only a gentle pressure to avoid damaging the strip.8. Hp 2410 Printer Manual After 15 fruitless minutes of messing with it, I realized that the new color cartridge was causing the problem.

did not work, but i believe it needs to be done to have it all work right.LAST BUT NOT LEAST Lucky number 7..... http://batteryuniveristy.com/hp-psc/hp-psc-2410-photosmart-error.php Any suggestions?? I could do nothing with the printer, not even scan. Where do I thread it through? - cburch 0 Thank you Bert! Hp Psc 2410 Reset

This time I pluged it into my UPS to hopefully prevent the power outage problem. Because we unwittingly purchased this product and are now stuck with a LEMON adn they have a job due to our naivity.Anyway, what has always worked for me anytime I get Using the Torx T10 screwdriver, remove the three screws that are exposed when you remove the cover (bottom left hand side, top left hand side and center top).4. weblink I fooled with this thing for hours and hours.

I would like to help you.Check for any obstructions or broken parts in the carriage path and see if the carriage will move freely now. Hp Psc 2410 Hourglass Clicking However, you will have to take apart the printer to get there. Does anyone know if there is anyone to use this printer without putting any color cartridge in it?

Not to mention that it will pull the paper through about half way and then stop and instruct you to hi the OK button to start the alignment again, but it

Thanks again! Thanks cdp - unknown Had the exact same problem and a google search sent me to this site. HELP.... Hp Psc 2410 Clean Scanner Glass Hope some of you find a solution, but doesnt look like there is one.

Please let me know if you have any suggestions.Thanks! - unknown 0 Press and hold the # and 3 buttons on the Control Panel while plugging in the power. iFixit: Repair Manual Official App Free – Google Play Install Select a Language: 中文 日本語 Deutsch English Español Français Italiano Nederlands Português Русский язык Türkçe Machine translation Help Translate iFixit Close I was able to fix my HP 2400 printer with your help from this page! http://batteryuniveristy.com/hp-psc/hp-2410-troubleshooting.php SUCCESS!

Loading... THANKS EVERYONE FOR YOUR HELP, IF THIS DOESNT WORK THEN YOU'LL MOST LIKELY NEED TO PURCHASE A NEW ONE. I had taken everything apart and failed to clean the glass next to the white stip and actually had the printer in my car ready take it for recycling and finally This is the first bit of useful information I've found.

Try power on while holding the cancel button. -no help3. by unknown on Nov 13, 2012 at 3:01pm Add comment Please sign in to comment 0 I am trying to solve my similar problem since 10 weeks . what to do ..some one can help me ????thanksMKA by unknown on Feb 3, 2013 at 9:44am Add comment Please sign in to comment Please sign in to comment HP LaserJet Its not all what its hyped up to be...I had this thing for nearly 2 years with nothing but problems, and this is real sad.

take it apart and clean it people! Remove the rear access door and the rear panel. by Anonymous on Aug 8, 2008 at 8:08pm Add comment Please sign in to comment 0 three screws. I USED A TINY ALAN WRENCH(WORKED GREAT) TAKE THEM OUT AND THEN OVER ON THE PANEL SIDE, TAKE A SCREWDRIVER AND LIFT FROM THE BACK-JUST POP IT OFF.I DID NOT TAKE

© Copyright 2017 batteryuniveristy.com. All rights reserved.