Home > Hp Officejet > Hp 4300 Printer Problems

Hp 4300 Printer Problems

Contents

Action Press the (Select) button to resume printing. top top 40 EIO X BAD TRANSMISSION To continue press (Select) Description The connection has been broken abnormally between the printer and the EIO card (HP Jetdirect card) in the specified The JOB setting determines that the clearable warning message appears until the end of the job that generated the message. Verify product Serial number entered: The serial number you provided does not match the selected product. navigate here

On the right side of the stapler/stacker, turn the stapler unit toward the front of the printer until the unit clicks into the open position. Remove the duplexer and try printing again. Turn the printer power off and then turn the printer power on. If the problem persists, turn the printer power off and then turn the printer power on. http://h20564.www2.hp.com/portal/site/hpsc/public/psi/troubleshootResults?sp4ts.oid=84041

Hp Officejet 4300 Driver

If so, reinstall the duplexer. For best results, use the HP driver that came with the printer. (See the printer user guide for information about printer drivers.) Press (Select) to clear the error message. (The job If print jobs continue to get stuck, then the firewall is not part of the problem.

  1. Figure 50: Pressing DIMM strait into slot Close the DIMM-access door.
  2. alternates with 41.3 LOAD TRAY XX: [Type] [SIZE] For help press ?
  3. Action Open the top cover and remove the print cartridge.
  4. After disabling the firewall clear the print queue and try printing again.
  5. X Description 0- Scanner error 1- Scanner startup error 2- Scanner rotation error Action Press the (Select) button to continue.
  6. If loose toner falls into the printer, it might cause temporary problems with print quality.
  7. top 13.10.00 FUSER JAM Description A paper jam exists in the fuser area.

Z7_3054ICK0KGTE30AQO5O3KA30R1 hp-pdp-secondary-navigation-portlet Actions ${title} Loading... top Handling persistent messages If a message persists requesting that a tray be loaded, or if a message indicates that a previous print job is still in the printer memory, press top 64 PRINTER ERROR For help press? Hp 4300 Series Printer Driver Download Press the Check button one more time to Print Menu Map and then press the Check button.

Pro Slate 12) OR Browse all HP products Please wait while we process your request. Hp Officejet 4300 Driver For Windows 7 Figure 28: Closing the rear door If the error persists replace the stapler/stacker or stacker. Cancel Ok Privacy Policy © Copyright 2016 HP Development Company, L.P. check that Check the configuration of the EIO (HP Jetdirect card) and the host computer.

Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions and/or refer to the following steps. Hp Officejet 4355 Driver top 59.4 EP MOTOR ROTATION ERROR (HP LaserJet 4300 only) Description The print-cartridge drive motor (HP LaserJet 4300 only) is not functioning properly. If the paper is folding into an accordion shape, make sure the print cartridge shutter (black plastic hinged piece covering the drum) located on the bottom of the cartridge opens when Replace any defective print cartridge.

Hp Officejet 4300 Driver For Windows 7

alternates with 68.X PERMENANT STORAGE ERROR To continue press (Select) Description One or more printer settings that were saved in the nonvolatile storage device are invalid and have been reset to http://support.hp.com/in-en/document/c02205477 Open Windows Services using one of the following methods: Search Windows for services, and click Services in the list of results. Hp Officejet 4300 Driver They change as the state of the printer changes. Hp Officejet 4300 Driver Download For Xp If you cannot find your product on this site, go to HP Support Center - Hewlett Packard Enterprise.

If the above action does not solve the issue, contact HP or authorized service provider. 22 PARALLEL I/O BUFFER OVERFLOW Description The printer's parallel buffer has overflowed during a busy state. check over here Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions and/or refer to the following steps. Values of X and Y are as follows: X = DIMM type 0 = read-only memory (ROM) 1 = random-access memory (RAM) Y = device location 0 = internal memory (ROM Z7_3054ICK0KGTE30AQO5O3KA3072 hp-country-locator-portlet Actions ${title} Loading... Hp 4300 Driver

Download and run HP Print and Scan Doctor to quickly and automatically perform several troubleshooting tasks known to resolve this issue. Reduce the complexity of the print job to avoid the error. Make sure it locks into place. his comment is here top 57.X PRINTER ERROR To continue turn off then on Description A temporary printing error occurred in one of the printer fans.

Reinstall the stapler/stacker or stacker. Hp 4300 Ink Check your warranty Manual warranty check * Required fields One or more of the values entered is not permitted. You might damage the fuser.

Z7_M0I02JG0KONJ30ACBBF8MM1084 hp-hero-support-search Actions ${title} Loading...

Action Turn the printer off and then on. Select your Model Privacy Policy © Copyright 2016 HP Development Company, L.P. This tool will detect HP PCs and HP printers. Hp Officejet 4300 Driver Download For Windows 8 Figure 26: Opening rear door Remove any paper found.

Plug the printer into a wall outlet and see if this resolves the problem. Critical error messages Critical error messages display warnings about device failures. Figure 8: Sliding the tray out If the edge of the jammed paper is visible in the feed area, slowly pull the paper down and out of the printer. (Do not http://batteryuniveristy.com/hp-officejet/hp4500-problems.php If you have an active support agreement or HP Care Pack, you can link them to your profile to ensure access to all services.

Find Solutions, ask questions, and share advice with other HP product owners. Be careful not to spill it on yourself or into the printer.) NOTE: NNOTE: If the jammed paper is difficult to remove, try opening the top cover all the way to Pro Slate 12) OR Browse all HP products Please wait while we process your request. Paper may not have exited the printer.

Description A stacker or stapler/stacker error has occurred. Solutions and updates HP has detected possible issues with your product. note: If your computer is using Windows XP or earlier versions of Windows, do not use these steps. NOTE: A loss of data will occur.

If the printer is on a network, AUTO CONTINUE should probably be set to ON. alternates with 52.XY PRINTER ERROR To continue turn off then on 53.XY.ZZ PRINTER ERROR To continue press cancel job 54.1 REMOVE THE SEALING TAPE FROM TONER CARTRIDGE 55.X PRINTER ERROR For Make sure you re-enable the firewall after you have finished testing. Figure 27: Removing paper Verify the deflector in the printer is working correctly.

Data gathered: Operating system Browser version Computer vendor Product name/number Serial number Connection port Driver/device description Computer and/or printer configuration Hardware and software diagnostics HP/Non-HP ink and/or HP/Non-HP Toner Number of The computer uninstalls the printer software. Turn the printer power off, and then replace the DIMM that caused the error. Use (Up Arrow) or (Down Arrow) to scroll to PRINT CONFIGURATION, and then press (Select).

Using a dry, lint-free cloth, clean any loose toner that might have fallen into the printer. Turn the printer power off and then turn the printer power on. If the above action does not solve the issue, contact HP or an authorized service provider. This page requires Javascript.

Modify your browser's settings to allow Javascript to execute. top 53.XY.ZZ PRINTER ERROR To continue press cancel job Description There is a problem with the printer memory. Remove all paper that is found within the paper path, and then reinstall the cartridge. Action Turn the printer power off and then turn the printer power on.

© Copyright 2017 batteryuniveristy.com. All rights reserved.