Home > Hp Laserjet > Hp Laserjet 5100 Troubleshooting

Hp Laserjet 5100 Troubleshooting

This will remove all devices from Printers & Scanners but not the supporting drivers, so you will just need to add the printer or scanner again. Disconnect the main motor cable (callout 1). Individual rollers (callout 2), located above the lower delivery rollers (callout 3), can be removed by using a flat-blade screwdriver to push gently on the top side of the roller. Please type your message and try again.            martí ferré Level 1 (0 points) Q: Problems with HP LaserJet 5100 With the latest system actualization ( OS X Yosemite 10.10.4) weblink

Warranty status:Unspecified Check warranty status Enter product serial number The serial number you entered,, matches a different product than the current product. Page 117: Top Cover Top cover Facing the front of the printer, open the top cover and remove the toner cartridge. Facing the back of the printer, remove the two machine screws (callout 1) that hold the fuser in the chassis. Figure 79. http://h20564.www2.hp.com/portal/site/hpsc/public/psi/troubleshootResults?sp4ts.oid=74341

Pro Slate 12) OR Browse all HP products Please wait while we process your request. This should result in you connecting to the internal web page of the printer. Printer sensors ........ Page 80: Formatter System, Powersave, Resolution Enhancement Technology This feature (accessed from the configuration menu) conserves power by shutting down the fuser and exhaust fans after the printer has been idle

  1. With the other hand, press the locking tab on each of the rollers (callout 2) and push the rollers back slightly from their secured positions.
  2. Page 76: High-voltage Power Distribution High-voltage power distribution Figure 11.
  3. Page 59 Sets 10 Mbps, half-duplex operation on the Sets 10 Mbps, full-duplex operation on the Sets 100 Mbps, half-duplex operation Sets 100 Mbps, full-duplex operation on Chapter 3 Printer operation
  4. Fan removal (right side of printer) 138 Removing and replacing parts www.GovTechMedia.com Q1860-90918...
  5. Page 3 LaserJet 5100 series printers service ____________________ www.GovTechMedia.com...
  6. Insert a small, flat-blade screwdriver under the fuser (at callout 2), and lift to disengage the fuser assembly detents.
  7. If the printer maintenance kit is installed at, and the counter is set to, 150,114 pages, then the message appears 150,000 pages later, at 300,114 pages.) Editing this number is similar
  8. CAUTION The edge (callout 3) has a metal ridge with sharp teeth.
  9. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.

If an installed device is not shown, reseat the device and print a new configuration page. Generated Thu, 24 Nov 2016 14:46:16 GMT by s_mf18 (squid/3.5.20) Leave the Queue blank and change the name to LaserJet 5100. Make sure that only a single piece of media is fed into the printer.

Page 209: Image Quality Image quality When you are working with customers, obtain a print sample before you begin ERROR The requested URL could not be retrieved The following error View more error codes What our customers are saying He made no charge for this service.” “ Kenneth Spencer KA Spencer Software Other companies couldn't repair my printer and could only Page 99: Paper Jam Paper jam To detect the presence of paper and whether the paper has been correctly fed, the following paper sensors are installed: Registration roller paper sensor (PS403) Troubleshooting process flowpage 187................................................................................................................................................................

Page 159: Face-down Bin-full Sensor Lever Face-down bin-full sensor lever The face-down bin-full sensor is located on the top of the upper delivery assembly. This product has been successfully added to your profile. Print This PagePrint ShareShare Url of this page: HTML Link: Bookmark Manuals Brands HP Manuals Printer 5100 - LaserJet B/W Laser Printer Service manual HP LaserJet 5100 Service Manual Hewlett-packard all Figure 98.

Possible values Note For developers only. The PCL font list shows all the PCL fonts currently available to the printer. The printer design eliminates: Ozone production Energy consumption 34 Printer description www.GovTechMedia.com... For a temporary fix, you can try turning your printer off and back on again.

Page 207 (DIMMs), paper trays, and printer languages. have a peek at these guys Use the flat-blade screwdriver to press down the two locking tabs (callout 3) on the top of the front cover (callout 4) and then remove the front cover by reaching under Please wait while we process your request. Tray 1 inner cover removal (2 of 2, front of printer) ......125...

it seems that the LJ is not connected or that there is a problem with the server (only with the LJ)... The primary charging roller is coated with conductive rubber with an ac bias applied to erase any residual charges and maintain a constant drum surface to create a uniform negative potential Lift the locking tab (callout 1) on the right-side roller cam, and slide the cam to the right. check over here Disconnect the two cables (callout 1) from the connector.

Does this happen? The default fuser mode is Normal for most types of paper, which should be optimal for most users. Page 144: Tray 2 Pickup Roller This procedure applies to Tray 2 and to any optional 250-sheet tray.

Check your warranty Manual warranty check * Required fields One or more of the values entered is not permitted.

Select your Model Privacy Policy © Copyright 2016 HP Development Company, L.P. Configure the printer according to your printing needs. When you slide the clutch on the shaft, make sure that the metal alignment tab is seated on the printer frame. Reseat or replace the interface cable and cycle the power. 3.

This is how the printer achieves its 1200x1200 dpi resolution. HP LaserJet 5100 Printer series Choose a different product series Warranty status: Unspecified-Check warranty status Manufacturer warranty has expired-See details Covered under Manufacturer warranty Covered under Extended warranty, months remaining Page 13 Figure 139. this content HP-UX Release 10.20 and later Hewlett-Packard makes no and HP-UX Release 11.00 and warranty of any kind with respect later (in both 32 and 64-bit to this information.

Turn the printer off for a minimum of 20 minutes to clear the error. 2. Page 135 Test print Figure 62. Figure 109.

© Copyright 2017 batteryuniveristy.com. All rights reserved.