Home > Hp Laserjet > Hp Laserjet 4200 Errors

Hp Laserjet 4200 Errors

Contents

alternates with 68.X PERMANENT STORAGE FULL To continue press (Select) 68.X PERMANENT STORAGE WRITE FAIL To continue press (Select) 69.X PRINTER ERROR To continue turn off then on 79.XXXX PRINTER ERROR Using a dry, lint-free cloth, clean any loose toner that might have fallen into the printer. Action Turn the printer power off and then turn the printer power on. Open and close the top cover to clear the message. weblink

If you are printing from Tray 1, verify that the correct paper size is selected at the printer control panel. If the message persists, contact HP Customer Support. If the message appears only with a certain software program or print job, contact the software vendor for assistance. Action If the incorrect size was selected, cancel the job or press the Help (?) button to gain access to help.

Hp Laserjet 4250 Error 13.20.00 Jam In Tray 2

Action Press the (Select) button to continue. MaintenanceKits 25,692 views 7:14 HP P3005 Grinding, Jamming Repair - Duration: 10:00. Please wait while we process your request. Check the configuration of the EIO (HP Jetdirect card) and the host computer.

If the above action does not solve the issue, contact HP or authorized service provider. An easy fix! - Duration: 7:47. If the above action does not solve the issue, contact HP or an authorized service provider. Hp Laserjet 4250 Error Codes Action Turn the printer power off and then turn the printer power on, if the error persists, contact HP or an authorized service provider.

If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. (Hot water sets toner into fabric.) Figure 15: Removing the jammed paper Figure 60: Sliding tray into printer After performing the actions above, press (Select) The page containing the error will automatically be reprinted if jam recovery is enabled. (Or, you might want Add to Want to watch this again later? This error can occur if the driver being used is not IEEE-1284 compliant.

An improper communications protocol might be in use. 13.20.00 Jam Inside Rear Door Try printing a job from a different program. Figure 7: Reinstalling the print cartridge and closing the top cover If a jam message persists, there is still jammed paper in the printer. top top 69.X PRINTER ERROR To continue turn off then on Description The optional duplexer is not functioning.

Hp Laserjet 4250 Error 13.01.00 Jam In Tray 2

The dual inline memory module (DIMM) that caused the error will not be used. If the above action does not solve the issue, contact HP, or contact an authorized service provider. Hp Laserjet 4250 Error 13.20.00 Jam In Tray 2 BrokenPrinter1 78,504 views 9:32 what causes hp Laserjets Paper Jam and how to fix fast - Duration: 2:19. Hp Laserjet 4200 Error Codes If the error 66.12.03 persists, replace the stapler unit.

WARNING: The fuser may be very hot; ensure that the fuser is allowed to cool for at least 30 minutes before touching. have a peek at these guys NOTE: If the top cover does not close, make sure the print cartridge is correctly installed. Print a menu map by pressing the Check button and then the Down Arrow to Information. Find by product name or number (e.g. 13.20.00 Jam In Tray 2 Hp 4015

Any suggestions. Figure 59: Ensuring the paper is seated correctly Slide the tray completely into the printer. top 59.4 EP MOTOR ROTATION ERROR (HP LaserJet 4300 only) Description The print-cartridge drive motor (HP LaserJet 4300 only) is not functioning properly. check over here Figure 31: Removing paper from duplexer Insert the optional duplexer into the printer.

If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used. Hp Laserjet 4200 Cartridge Installed Message top 49.XXXX PRINTER ERROR To continue turn the printer off then on Description The printing operation has been aborted. Uploaded on Mar 4, 2010Fixing HP printer paper jam error.

It is also causing print problems, seems like a power supply going out.

  • Try printing a job from a different software program.
  • Sign in Share More Report Need to report the video?
  • Flip it to the gear side (the left side) and press inwards on the fuser tab to make sure it is fully clicked in place, as shown below.
  • Figure 42: Plugging the power cord in Reinstall the optional duplexer, if it was removed.
  • and may not be used without advance written permission of PrinterTechs.com, Inc.

Up next How To Fix hp Laserjet 4200n 4300n 4250dn 4350dn Swingplate PART 2 - Duration: 11:30. If a jam message persists, it is possible that paper is still jammed in the printer. Check the configuration of the HP Jetdirect card (EIO card). Hp Laserjet 4200 And 4300 Series Printers Drivers alternates with 64 PRINTER ERROR To continue turn off then on Description A temporary printing error occurred in the scan buffer.

Add to Want to watch this again later? Be careful not to spill it on yourself or into the printer.) NOTE: NNOTE: If the jammed paper is difficult to remove, try opening the top cover all the way to Action NOTE: Press the ? (Help) button for detailed information about clearing the jam. http://batteryuniveristy.com/hp-laserjet/hp-laserjet-2200-errors.php top 57.7 DUPLEX FAN FAILURE Description The cooling fan in the optional duplexer is not functioning.

BrokenPrinter1 20,161 views 2:19 Cambio de Swing Plate HP 4345 parte 1 - Duration: 24:01. Pressing the Select (check) button should clear the message. top 8X.YYYY EIO ERROR Description The EIO accessory in slot [X] has encountered a critical error. [X] description: 1 = EIO slot 1 - The printer detected an error with the Turn the printer power off and then turn the printer power on.

Types of messages Status messages Status messages reflect the current state of the printer. If the message persists, contact HP Customer Support. If the error persists, contact HP support. About Press Copyright Creators Advertise Developers +YouTube Terms Privacy Policy & Safety Send feedback Try something new!

Please try the request again. Sign in to make your opinion count. alternates with 59.XY PRINTER ERROR To continue turn off then on Description A temporary printing error occurred. Loading...

Reinstall the stapler/stacker or stacker.

© Copyright 2017 batteryuniveristy.com. All rights reserved.