Home > Hp Laserjet > Hp 4000 Error Code

Hp 4000 Error Code

Contents

It was nice to get this 4000 back in business. What happens is when power is applied to the selenoid when a paper request is made it causes the "L" arm to move to the selenoid center and releases the gear My separation roller - the blue & grey roller in the paper tray - had moved out of place. It was difficult to figure out and it turned out to be the paper feed assembly located in the front of the printer. his comment is here

Click here for information on contacting HP support at http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp?locale=en_US&docIndexId=179680&taskId=101&prodTypeId=18972&prodSeriesId=25301. top System Error 06:10 Explanation Main NVM failure - not detected, read/write failed or readback error. They sell replacment rollers on this site. Click here for information on contacting HP support at http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp?locale=en_US&docIndexId=179680&taskId=101&prodTypeId=18972&prodSeriesId=25301.

Hp Laserjet 4000 Error Codes

Recommended action Try the following: Turn the printer off (using the power switch at the back of the printer), and disconnect the power cable. I hope that this post helps someone else in the future with a persistant 41.5. I've open up the printer to see if theres any breakage of the sensors actuators or any been knock out of positions but theres none. Recommended action Try the following: Turn the printer off (using the power switch at the back of the printer), and disconnect the power cable.

Recommended action Try the following: Remove all the ink cartridges and reinstall them in the printer. In fact a couple of years ago I posted a response for a simliar problem which I assume was your issue and if you had done a search you would have Do you know where I can find any photos or parts diagrams of this area of the printer?Thanks,TOM - Anonymous 0 Go to the link below and download the service manual.http://www.hylink.com/PrinterManual.html Replace the faulty printhead.

The clutch can slide off with it (the metal and plastic piece).See a pic of it here: http://www.mival.ro - scribb 0 Anyone want an HP LaserJet 4050N? Recommended action Try the following: Check that the firewire cable is correctly connected to the printer. It comes with a 41.5 Error free of charge so that you may keep your technical skills up to par. P/N= RG5-2651-090CN It has an electric motor/clutch on the end that was not working properly.

In these cases, a link will be provided to contact HP support for further assistance. If the error continues, call HP for support. Turn the printer off. 2.  Simultaneously hold down the minus side of the Item key, and the minus side of the Value key. 3.  Turn the printer on while holding these top System Error 29.1:01 Explanation Printhead Cleaner not inserted correctly in slot 2.

41.5 Error Hp 4000

We have purchased the tray 2 drive clutch, but now find that we don't know how to install. Wait 15 seconds and reconnect the power cable and turn the printer on. Hp Laserjet 4000 Error Codes top System Error 61:01 Explanation The file format is incorrect and the printer cannot process the job. 41.5 Printer Error Hp Laserjet 4000 Click here for information on contacting HP support at http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp?locale=en_US&docIndexId=179680&taskId=101&prodTypeId=18972&prodSeriesId=25301.

Wait 15 seconds and reconnect the power cable and turn the printer on. http://batteryuniveristy.com/hp-laserjet/hp-4050-error-code.php Click here for information on contacting HP support at http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp?locale=en_US&docIndexId=179680&taskId=101&prodTypeId=18972&prodSeriesId=25301. Click here for detailed information on how to perform an Image quality diagnositcs print . Reseating the partition roller grasp and food detachment roller ought to alter this issue. Hp Laserjet 4000 Troubleshooting

by dmzcompute on Jan 5, 2009 at 4:58pm Add comment Please sign in to comment 0 found this thread via Google while trying to resolve a 41.5 code on my 4050N...in If the problem persists, replace the printheads. After performing the actions above, press GO. http://batteryuniveristy.com/hp-laserjet/hp-1320-error-code.php This error usually occurs with smooth media, such as transparencies or labels.

Turn the printer off and delete the print queue. If not, update the firmware to the latest version. Wipe out paper and tray alteration issues.

Click here for information on contacting HP support at http://h20000.www2.hp.com/bizsupport/TechSupport/CallHP.jsp?locale=en_US&docIndexId=179680&taskId=101&prodTypeId=18972&prodSeriesId=25301.

O rolo da separação é peça da bandeja de papel e é mostrado no retrato mais baixo:http://www.printertechs.com/tech/mkinst/mk-4000-7feed.php - Anonymous 0 Have an HP 4000n with exactly same problem.The fix you suggested Wait 15 seconds and reconnect the power cable and turn the printer on. It seems that the pad has another function besides noise reduction - when the solenoid is energized without the pad, the arm is momentarily magnetized, and this also causes enough sticking If the error continues, call HP for support.

The help docs I got from HP was leading me to believe I was going to have to replace the engine controller board and/or the laser scanner. If the System Error continues, replace the Ink Supply Tubes and Trailing Cable ⇒ Page 8-33. Cleaning or replacement of the refeed assy has cured it everytime.http://www.partsnow.com/service_today/1102.asp is a very informative and technical helper on this issue. check over here Click here for more information on how to upgrade firmware .

Recommended action Try the following: Turn the printer off (using the power switch at the back of the printer), and disconnect the power cable. If not, update the firmware to the latest version. by moe on Mar 18, 2012 at 7:59pm Add comment Please sign in to comment 0 I also have a printer of same category but when i was using that printer Does it still jam or come out the top.

Pro Slate 12) OR Browse all HP products Please wait while we process your request. The product could not be added to your profile at this time. Also, after any errors, as it recovers back to ready state, it will continue to try and grab paper even if the tray is empty. If there is a wrinkled mass of media inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction.

At the front end, there is a roller, made of blue plastic with gray rubber. Replace the faulty printhead.

© Copyright 2017 batteryuniveristy.com. All rights reserved.