Home > Hp Deskjet > Hp Deskjet 5550 Error Lights

Hp Deskjet 5550 Error Lights

Contents

Touching these parts can result in clogs, ink failure, and bad electrical connections. Open the top cover. During the install process I am halted at the "unplug your USB cable and plug it in again." When I do nothing happens. Open the top cover. his comment is here

Disconnect the USB cable from the rear of the product. Reattach the duplexer. Make sure that the carriage can move freely across the width of the product by gently pushing the carriage to the left and then to the right. If the test page does not print, continue with the next solution. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c00035263

Hp Deskjet 5550 Printer Problems

by Andrew on Jul 1, 2004 at 2:29pm Add comment Please sign in to comment 0 I am having trouble getting my printer to print out more than one page, stops Step one: Remove the cartridge Press the Power button () to turn on the product. CAUTION: If the paper tears when you remove it from the rollers, check the rollers for torn pieces of paper that might remain inside the product. Step one: Remove the cartridge Press the Power button () to turn on the product.

  • Figure : Move the paper width guide inward Move the paper length guide inward until it rests against the edge of the paper.
  • Press the Power button () to turn on the product.
  • And the lights just keep blinking.Next step? ...
  • by Ed Smith on Aug 8, 2006 at 10:55am Add comment Please sign in to comment 0 My HP 5550 will print one page, pick up the 2nd page, pull it
  • Apply a moderate amount of pressure to remove any dust or dirt buildup.
  • Step three: Print a self-test report Print a self-test report to make sure that the hardware functions correctly.
  • Use both hands to pull out whole sheets of paper to avoid tearing them.
  • Slide the cartridge at a slight upward angle into the empty slot, and then gently push it forward until it snaps into place.

Disconnect the power cord from the rear of the product. Does any one have a lead to these parts? sure the performance is good, but i've had headaches with it almost since day 1.any suggestions on getting this printer to work?any help would be great. Hp Deskjet 5550 Manual If the test page does not print, continue with the next solution.

If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting. Hp Deskjet 5550 Not Printing The only similarity to your printer is that they both print. Make sure that the power cord is connected to the wall outlet. http://h30434.www3.hp.com/t5/Inkjet-Printing/deskjet-5550-resume-amp-power-lights-blinking/td-p/931543 Disconnect the USB cable from the rear of the product.

If both cartridges are in the carriage, skip to the next solution. Hp Deskjet 5550 Troubleshooting Guide Press the buttons on the sides of the duplexer at the same time, and then pull the duplexer toward you to remove it. note: The product might go through a warm-up period which might last up to two minutes. Z7_3054ICK0KGTE30AQO5O3KA30H5 hp-country-locator-portlet Actions ${title} Loading...

Hp Deskjet 5550 Not Printing

If the carriage is stuck on the right side of the product, move the carriage to the left side of the product. Figure : Paper pick roller Lightly dampen a cotton swab moistened with bottled or distilled water, and then squeeze any excess liquid from the swab. Hp Deskjet 5550 Printer Problems by mahbuban on Dec 17, 2007 at 11:28am Add comment Please sign in to comment 0 The plastic part that usually breaks on the 5550s is a part of the pusher Hp 5550 Print Cartridge Status Light Is Flashing Follow these steps to perform a reset.

Insert the duplexer into the rear of the product, and then push it forward until it snaps into place. this content Once I heard the clutch re-engage, but when I tried to print, only the whirring sound, no movement.Tried to adjust the clutch again, but the 'clank' of readjustment does not happen The self-test report prints. If one or both of the cartridges are missing, continue to the next step. Hp Deskjet 5550 Printer Driver

Dymo labelwriter 450 add-in not... [SOLVED] RAM not recognized in BIOS/ nor... [SOLVED] Windows 10 deadlocks/freezes... Note that the pad does not always soak up all the ink, so if you tilt an HP printer you can spill the ink out of the service station, (especially if When I first got a look at the printer the power light and resume lights were both flashing at the same time, which means a jam error, as you know. http://batteryuniveristy.com/hp-deskjet/hp-deskjet-5550-error.php Do not pull paper from the front because it can damage the device.

Nothing on HP site -- any thoughts?? Hp Deskjet 5550 All Lights Blinking He is using a USB cable to a Dell Latitude D800. Solutions Your product has either a rear access door, or a two-sided printing accessory (duplexer).

Help!!

If you completed all the preceding steps and your product still has an issue, you might need further assistance from HP. by Stephen on Oct 31, 2005 at 4:53pm Add comment Please sign in to comment 0 My 5550 printer is not responding...it will not do a test print, nor print from I have tried the org. Hp Deskjet 5550 Reset Figure 105: Remove the cartridge Step two: Insert a new cartridge Follow these steps to insert a new cartridge.

Using a screwdriver or similar tool, push the capping station toward the back of the printer. I have re-installed the printer and driver and have the same symptoms. Solution six: Service the printer If you have completed all the steps listed above and are still experiencing a problem, continue to the Service the printer section at the end of http://batteryuniveristy.com/hp-deskjet/hp-deskjet-5550-error-printing.php It freely moved from left to right.

by steve44073 on Dec 21, 2006 at 7:57pm Add comment Please sign in to comment 0 If you print the tap-4 test twice in a row the error code should only by unknown on Jan 18, 2006 at 1:04pm Add comment Please sign in to comment 0 Our hp 5550 recently started to cut off the bottom (approximately 1/4) of printed characters So I tried denatured alcohol and soaked it in a little glass jar with a lid over night. Some newer HP printers like the 5550 use grease on the carriage rail, Chemplex 710 will work on a 5550, I advise cleaning off all the old grease if you are

Turn the door latch counter-clockwise, and then pull the door away from the product to remove it. The Print dialog box opens. The job may not have entirely canceled, hit the resume button and it spit out half of a page (cancelled job) and a calibration page. If the test page does not print, continue with the next solution.

but it only supports 300 dpi... Solution four: Adjust the print settings The product might not pick up paper if the paper size and type in the paper tray do not match the size and type settings if paper feeds it will just go straight out the back.ST by Stephen on Dec 21, 2007 at 3:48pm Add comment Please sign in to comment 0 What does the error The yellow arrow points to the Black Cartridge Problem icon.

Reach inside the product, and then manually move the carriage. How to print a self-test report Make sure that plain white paper is loaded in the input tray. Sign-in Register Site help Skip to ContentSkip to FooterLaptops & tablets Business Premium Gaming Standard laptops Workstations Convertibles & detachables Tablets 3-in-1 Desktops Business Immersive Gaming Towers Workstations All-in-ones 3-in-1 Printers The self-test report prints.

© Copyright 2017 batteryuniveristy.com. All rights reserved.