Home > Hp Color > Hp Color Laserjet 3500 Error 13.20.00

Hp Color Laserjet 3500 Error 13.20.00

If it is not approx. 160 ohms, replace the multi-purposetray pickup solenoid. 360 Chapter 7 TroubleshootingENWW Table 7-6.Causes for jams in the Tray 1pick-uparea (continued) CauseDefective feed motor Defective DC controller PCB. If the paper is heavier than 163 g/m2 (43 lb), it may not be picked from the tray. Figure 5: Adjust the paper guides Press (Select) to resume printing. Hide thumbs Also See for 3500 - Color LaserJet Laser Printer Manual - 24 pagesTechnical reference manual - 342 pagesAdministrator's manual - 302 pages 1 2 3 4 5 http://batteryuniveristy.com/hp-color/hp-color-laserjet-3500-error-59-a0.php

ENWWReplacement parts configuration 355 Paper path troubleshootingJam error messages occur if paper fails to arrive at or clear the paper path sensors in the allowed time. ENWWReplacement parts configuration 353 DC Controller (previously installed in another printer) replacement configurationTo ensure optimum print quality, the printer needs to be calibrated by performing 3 Calibrate Now's using the printer HP Color Laser-Jet 3500 ghost image on the page HP Color LaserJet 3500 paper wrinkle problem Hewlett Packard CLJ 3500 black dots HP Color LaserJet 3500 making dirty copies HP Color I've had a few instances where I shoved the card through and nothing came out, but the printer jam cleared. http://www.fixyourownprinter.com/posts/35152

If you feel like tackling it yourself you can try reseating all the connections to the drum motor and the DC controller board. Well anyway, thanks for the help DMZ! Press (Select) to select CONFIGURE DEVICE. Press (Down arrow) to highlight CONFIGURE DEVICE.

I have tried cleaning paper with no luck.What is the process for using the "card stock routine"?Thanks! - unknown 0 I have a lexmark all in one printer. BrokenPrinter1 78.504 visualizaciones 9:32 HP 4200 4250 4300 4350 13.20 error on startup fix - Duración: 1:44. Click here to see "Print media specifications" for more information. Either the paper is still activating a sensor/flag or the sensor/flag is out of position due to clearing the jam.

Press to enter the MENUS. 2. For instructions on clearing jams, see the following sections in this chapter.                                                                                                                                               Figure 7-1.Jam area locations and sensor positions   1Area 1: Tray 1 pick-uparea2Area 2: Tray 2 pick-up/feedarea3Area 3: Tray 3 pick-uparea4Area 4: Once I lifted the bottom sensor, i found the paper put it back together and it worked.

NOTE: Use the paper path test in the Diagnostics menu to print pages while troubleshooting.

Remove any paper. Deshacer Cerrar Este vídeo no está disponible. To identify the specific Jam location code for the HP Color LaserJet 3700 series printer, display the event log entries on the control panel. could also be a torsion spring out of position on a flag.

  1. This will illiminate the top delivery sensor.If the last resort is the paper pickup assy.
  2. Use only paper that meets HP specifications.
  3. Was the pull tab on the cartridge removed?
  4. Replace the DC controller PCB.
  5. by Anonymous on May 23, 2007 at 12:36pm Add comment Please sign in to comment 0 Likely it is one of the two swing arm assemblies or their guide rails.
  6. If worn or deformed, replace thetray pickup roller.roller.Defective separation pad.If dirty, clean the pad.
  7. Video Photos Link Add Upload Upload × × Draw a box over the problem!!
  8. All images and logos used with permission from the respective owners.

Reset the printer. http://www.fixya.com/support/t15115744-hp_color_laserjet_3500_error_code If the printer still continues to jam, contact HP Customer Support or an authorized HP service provider. Got it, continue to print 2012-2016 ManualsLib.com About Us About ManualsLib Privacy Policy F.A.Q. See if one side sticks out more than the other.

We provided integrity and superior HP Color LaserJet 3500/3550/3700 printer service at competitive prices. this content THANK YOU!!! OFF Printer will not attempt to reprint jammed pages. hope this helps pdouglasss Posted on Jan 10, 2009 Helpful 0 Not Helpful Flag You can't post conmments that contain an email address. × Comment Anonymously Video Images Najeeb Ahmed 52

Remove any paper. To locate these connectors, open the front door and remove the connector cover (part numberRC!-1488-000CN)on the lower front right side.13.02.00When the paper does not pass the registration paper sensor (PS4) within Fix the problem. weblink Figure 27: Press black ridges on fuser To reattach the lower rear door (rear output bin), hold the door at a 45 degree angle, and fit the peg into the round

Press (Select) to select OFF. HP 3500/3500N printer maintenance service and repair in Southern California! Cargando...

Press (Down arrow) to highlight SYSTEM SETUP.

BrokenPrinter1 42.126 visualizaciones 6:55 Printing a test sheet on my 13 year old HP LaserJet 2100 - Duración: 0:35. If worn or deformed, replace the pick-up/feedassemblyIf the movement of the registration shutter is not smooth, make it smooth. When you replace a fuser under these circumstances, the control panel will not automatically prompt you to reset the fuser count. Image formation troubleshootingpage 405................................................................................................................................................................

I did get the printer to work for a while: on the fuser assembly, one blue lever was up and the other was down. You can print your Parts List or export to Excel to further work with him. The first step in troubleshooting any problem is to use the basic troubleshooting checklist provided below. http://batteryuniveristy.com/hp-color/hp-color-laserjet-3500-error-41-7.php Feed single sheets from Tray 1.

Measure the resistance between the connector J1016-8(REGCL) andJ1016-7(+24VA). Are all necessary cables connected? Figure 4: Reinsert paper into tray Confirm that the paper guides are against the paper without bending it and that the paper does not extend above the fill tabs. From the event log, determine the frequency of a particular jam.

Iniciar sesión 310 11 ¿No te gusta este vídeo? Wait until the page completely settles in the output bin before removing it. CAUTION: Do not open the shutter door while the fuser is in the printer. Well I know this form is over 4 yrs old but thought I would post on here in case anyone is still using this power horse of a printer.

If the jam occurs when the printer is turned on, check the paper path for small torn pieces of paper. or it's affiliates. compu85 6.077 visualizaciones 4:51 how to fix grinding noisy hp laserjet 4200 4300 4250 4350 swing plate RM1-0043 - Duración: 9:32. at least for now.

No more paper jams! If it is not approx. 160 ohms, replace the paper feeder pickup solenoid. Figure 21: Slide out lower rear door Remove the lower rear door (rear output bin) by lifting and pulling the right side of the door while pressing the tab with the NOTE: If the paper tears, make sure that all paper fragments are removed from the paper path before resuming printing.

Figure 34: Open front door CAUTION: Do not place anything on the transfer unit. fuser from HP in the UK, but was told that they are not currently available ... Happended on two printers.http://h20000.www2.hp.com by dmzcompute on Mar 3, 2006 at 12:36pm Add comment Please sign in to comment After 7 hours of fighting my 3500, I found this article. Data collection To help troubleshoot paper jams, gather the following information: The exact paper jam error code displayed on the control panel The location of the leading edge of the paper

© Copyright 2017 batteryuniveristy.com. All rights reserved.